Tineco GO HammerHead Mess Detect Complete Floor Washer

Tineco Floor One Steam is the smart floor washer which automatically detects how dirty the floor is and applies the appropriate amount, steam, water, roller pressure and suction power to ensure the perfect hard floor clean every time.

There is no need to vacuum an area first because the Floor One can vacuum and wash the floor simultaneously.

The Steam can be used on non-carpeted floor such as vinyl, tile, and sealed wood floors.

The floor washer produces up to 80dBA of sound.

To start the Steam's self-cleaning mode, please follow the following steps: Place the floor washer on the storage tray. Empty the Dirty Water Tank. The Clean Water Tank should be at least 40% full of water. Plug in the appliance and press self-cleaning button at the top of the handle to start the brush roll self-cleaning mode. The floor washer will automatically shut off once finished. The entire self-cleaning process takes about 100 seconds.

We advise to clean the brush roll after each use.

Suction power for the floor washer ranges from 10 AW to 18AW (Air Watts) depending on how dirty the floor is.

The Floor One Steam can run 12-20 minutes depending on how fast the water and steam flow rate is.

The Clean Water Tank capacity is 0.75L. The Dirty Water Tank capacity is 0.75L.

The temperature can be between 41°F ~ 140°F （5°C ~ 60°C). Typically normal tap water is fine to use for cleaning. Please do not use hot water as this can cause internal damage to the pipes in the steam.

We recommend storing the Steam on the storage tray that is provided with the appliance. The storage tray allows the self-cleaning function to work more easily as the tray was designed to fit the head of the Steam.

The Steam will automatically adjust the solution and clean water flow to make sure you have the ideal cleaning experience.

WFR ranges from 25 to 55ml/min, SFR ranges from 25 to 35 g/min, in relation to how dirty the environment is.

The unique brush roll can help to remove animal hair and suck it into the Dirty Water Tank.

Normally this does not happen because the brush roller diameter size is big enough so it can avoid getting tangled. If there is a tangle, just remove the brush roller from its holder and use the cleaning tool to remove the hair tangle from the brush roller.

There is no need to use distilled water. Tap water is perfectly fine to use in the Steam. Please do not use hot water as this can cause internal damage to the pipes in the Steam.

We would not recommend using bleach in this machine as it could damage the machine.

The product weights about 13 lbs(6kg).

The warranty lasts 2 years.

There's no steam in standard mode. And it will spray steam in steam mode.

around 26 ft. (8m)